Coolroom Panels
Enviroclad’s Enviropanel is an Insulated Structural Coolroom Panel, the optimum product for Australians to safely invest in. Our Coolroom Panels are an extremely lightweight building product with exceptional strength and versatility.
The low cost and fast assembly ensure the lowest building costs with a sharp architectural appearance and excellent insulation values.
100% Australian Made In South Australia
Enviropanel Coolroom Panel is made and manufactured in our Berri, South Australia factory by a 100% Australian owned company.
All of the materials used to create our coolroom panels are of the highest quality, including G3000 CRP Grade Colorbond Steel and our standard white Expanded Polystyrene core with a Fire Retardant coating to reach an elite performing ‘R’ Value
Fire Retardant EPS Core Coolroom Panels
The inside of our Enviropanel Coolroom panel is made with our EPS Core, which is manufactured on site in Berri with the Fire Retardant coating, so that when the EPS is exposed to flame, the Fire Retardant coating self-extinguishes when the fuel load is removed from contact.
Safe, Cost-Effective and Custom
With the technology of the Flame Retardant EPS core, and the specific modern construction methods, our Enviropanel coolroom panels are an extremely safe and cost-effective building solution for whatever your project or ambition.
The panels can be used for any construction within their limitations that is not required to be a firewall. All of our Coolroom Panels are 1200mm wide, and the length is custom-made, sized to suit your project. We manufacture in a variety of thicknesses from 50mm through to 250mm.
Custom processing of coolroom panels is available on request, allowing panels to be tailored to your project dimensions to reduce on-site trimming, minimise waste, and streamline installation. If your project also calls for insulated wall panels or insulated roof panels, we manufacture those to the same standard.
Our Enviropanel coolroom panels remain the most affordable product of anything in its class, and with a low overhead processing facility in Berri, South Australia, Enviroclad will make certain it stays that way.
Energy Efficiency Across Australia’s Climate Zones
From the heat of the Northern Territory to the cold snaps in rural Victoria, maintaining a stable internal temperature is essential. Our cool room panels are engineered with R-values that perform across all Australian climate zones, reducing the load on your refrigeration and HVAC systems year-round.
Why Choose Enviroclad for Coolroom Panels?
We’re a small, specialist team, not a call centre.
From your first enquiry through to delivery, you deal with the same people who actually make the product. Our manager can step off a phone call and onto the factory floor, and we have our own in-house engineer on staff. That’s the level of technical knowledge backing every order. We deliver our coolroom panels for sale Adelaide-wide, servicing all of South Australia from Port Lincoln to Mount Gambier, and freight into rural Victoria, NSW, and the Northern Territory.
Enviroclad’s Enviropanel range is manufactured at our facility in Berri, South Australia, where every cool room panel for sale can be custom-made to your project specifications. These can be in 1200mm standard widths, with lengths tailored to suit a variety of thicknesses from 50mm through to 250mm.
Benefits of Coolroom Panels for Australian Businesses
Choosing the right cool room panels affects everything, from your energy bills to the longevity of your build.
Here’s what sets Enviropanel apart:
- High thermal efficiency: Our EPS core (available in standard white or Graphite Infused) delivers elite R-values, keeping your cold chain tight across Australia’s variable climate.
- Energy cost savings: Superior insulation means your refrigeration systems work less, reducing running costs from day one.
- Lightweight and strong: Panels span from 1800mm up to 16,000mm, offering structural performance without the weight of traditional building materials.
- Mould and bacteria resistant: The sealed Colorbond steel surfaces are easy to clean and maintain, critical for food-safe and pharmaceutical environments.
- Fast installation: Interlocking sides mean fewer joins, quicker builds, and less time on site.
- 100% Australian-made: Manufactured right here in Berri, SA by a team that knows the product inside and out.
Australia Wide Delivery
We work closely with Third Party Freight companies to transport our panels even further throughout Australia. We often freight our Enviropanel coolroom panels into the Northern Territory, from Alice Springs all the way up to Darwin.
We also deliver coolroom panels to South Australia, send coolroom panels to Victoria and ship our coolroom panels to NSW.
Contact us to discuss your project for a no-obligation free quote.
BROCHURES &
TECHNICAL
DOCUMENTS
Enviropanel Insulated Structural Panel Brochure
Enviroclad Coolroom Sections/Extrusions
Steeled Skinned Panel Technical Information
Span Table Wind Pressure
Span Table Internal Cold Storage
Code of Practice Sectional Coolroom Installation
Sandwich Panel Calculated Thermal Performance
Gallery
Which Coolroom Panel Thickness Do You Need?
Selecting the right thickness depends on the temperature you need to maintain and the application.
Here’s a general guide:
| Thickness | Typical Application | Approx. R-Value |
| 50mm | Internal partitions, non-refrigerated enclosures | ~1.2 |
| 75mm | Cool rooms (above 0°C) produce storage | ~1.8 |
| 100mm | Standard cool rooms, commercial refrigeration | ~2.4 |
| 125mm | Sub-zero cool rooms, meat processing | ~3.0 |
| 150mm | Freezer rooms (–18°C and below) | ~3.6 |
| 200mm | Deep freeze, blast freezer environments | ~4.8 |
| 250mm | Ultra-low temperature cold storage | ~6.0 |
Not sure which thickness your project needs? Get in touch, and our team will walk you through it.
Coolroom Panels: Industries We Supply
Our coolroom panels for sale go into builds right across the country.
We regularly supply:
- Food processing and packaging facilities
- Supermarkets and grocery cold storage
- Restaurants, commercial kitchens, and hospitality
- Pharmaceutical and medical storage
- Agriculture and horticulture, post-harvest cooling, and pack houses
- Cold storage and logistics warehouses
- Butchers, fishmongers, and seafood processors
- Manufacturing clean rooms
Beyond cool room panels, Enviroclad also manufactures polystyrene blocks and void formers in concrete slabs for the broader construction industry.
Frequently Asked Questions
Coolroom panels are insulated structural building panels designed to create temperature-controlled environments.
Each panel is built with a high-density Expanded Polystyrene (EPS) core sandwiched between two skins of G300 CRP Grade Colorbond Steel, forming a rigid, lightweight, and thermally efficient product that holds internal temperatures with minimal energy loss.
It depends on the target temperature. As a rule, cool rooms holding above 0°C typically use 75mm–100mm panels, while freezer rooms at –18°C or below generally require 150mm or thicker.
Refer to our thickness table above or contact us for a recommendation specific to your build.
Yes. Our Enviropanel coolroom panels are manufactured using G300 CRP Grade Colorbond Steel and Fire Retardant EPS, meeting relevant Australian building and construction standards. We can provide compliance documentation on request.
Our coolroom panels for sale are designed for fast, straightforward installation with interlocking sides. Experienced builders and handy operators can install them, though we always recommend following proper construction methods.
Our team can advise on best practices for your project.
Absolutely. We run our own trucks into Adelaide almost daily and service all of South Australia.
We also freight into Victoria, NSW, and the Northern Territory via trusted third-party carriers. Coolroom panels Adelaide pickup is also available from our Berri facility.
Every single coolroom panel we supply is custom-made to your project specs. Standard width is 1200mm, lengths are made to order, and we produce thicknesses from 50mm to 250mm.
Our EPS core includes a fire-retardant coating. When exposed to flame, the EPS melts away from the source and self-extinguishes once the flame is removed. Enviropanel is suitable for any construction within its limitations.
Contact our team directly for warranty details specific to your order and application.
Contact Our Team
Every Enviropanel coolroom panel is custom-manufactured to your project specs right here in Berri, South Australia.
Our team will walk you through panel thickness, custom dimensions, delivery options, and anything else you need to get your build sorted. From a single cool room fit-out to a large-scale commercial project, we supply enterprises, builders, and home handymen right across Australia.
You’ll deal directly with the people who make the product, not a sales rep or a call centre. Contact us today for a free, no-obligation quote. Get in touch here or give us a call.