Coolroom Panels in South Australia
ENVIRONMENTALLY FRIENDLY
EXCEPTIONAL THERMAL QUALITIES
FLAME RETARDANT MATERIALS
ACOUSTIC VALUES
Enviroclad is a South Australian manufacturer through and through. Our cool room panels are produced at our Berri facility in the Riverland, and we deliver across the entire state on our own trucks and through trusted freight partners.
With a direct line from our factory floor to your site, you won’t need to deal with interstate logistics or border-crossing delays.
State-Wide Coverage From Berri
We run our own vehicles to deliver cool room panels in Adelaide almost daily and service every corridor of South Australia:
- Adelaide and metro surrounds: Industrial precincts across Salisbury, Edinburgh Parks, Lonsdale, and Wingfield
- The Riverland: Our home base, with same-day dispatch available for local projects in Berri, Renmark, Loxton, and Waikerie
- The Barossa and Clare Valleys: Winery cool rooms, cellar door storage, and hospitality fit-outs
- The South-East: Cool room panels to Mount Gambier, Naracoorte, Bordertown, and the Limestone Coast dairy and seafood sectors
- Eyre Peninsula and Port Lincoln: Seafood processing, tuna storage, and agricultural cold chain
- Port Augusta and the Mid-North: Pastoral station storage and remote community cool rooms
Engineered for South Australian Conditions
South Australia experiences some of the most extreme temperature swings in the country. Adelaide regularly pushes past 40°C in summer, the Riverland and Murray Mallee see sustained heat for weeks, and the south-east drops to near-zero on winter mornings.
Our South Australian coolroom panels are specified with R-values that perform across this full range.
Every panel pairs a Fire Retardant EPS core, available in standard white or Graphite Infused, with G300 CRP Grade Colorbond Steel skins. Panels are manufactured to your project dimensions: 1200mm standard width, custom lengths up to 16,000mm, and thicknesses from 50mm through to 250mm.
We also produce polystyrene sheets and EPS foam blocks at the same facility for broader construction and packaging requirements.
Who We Supply With Coolroom Panels Across South Australia
Our coolroom panels go into builds across every major SA industry sector:
- Wineries and cellar doors across the Barossa, McLaren Vale, Clare, and Coonawarra
- Seafood processing in Port Lincoln, Ceduna, and the South-East
- Dairy and livestock processing through the Murray Mallee and Limestone Coast
- Supermarkets, butchers, and independent retailers state-wide
- Commercial kitchens and hospitality across Adelaide and regional SA
- Pharmaceutical and medical cold storage
- Agricultural pack houses and post-harvest cooling
Our Products
Frequently Asked Questions
Are your panels compliant with Australian Standards? +
Yes. Our South Australian coolroom panels are manufactured using G300 CRP Grade Colorbond Steel and Fire Retardant EPS, meeting relevant Australian building and construction standards. Compliance documentation is available on request.
Can I install coolroom panels myself? +
Our panels are designed for efficient installation with interlocking sides. Experienced builders and competent operators can manage the installation, provided proper construction methods are followed. Our team can talk you through best practices for your build.
What thickness coolroom panel do I need? +
Cool rooms that hold above 0°C typically require 75–100mm panels. Freezer rooms at –18°C or below generally need 150mm or thicker. South Australia's extreme summer heat, particularly through the Riverland and northern regions, means adequate insulation is critical for keeping energy costs under control. Contact us for a site-specific recommendation.
Do you deliver coolroom panels across South Australia? +
Yes, the entire state. We run our own trucks into Adelaide almost daily and service the Riverland, Eyre Peninsula, Mid-North, South-East, and everywhere in between.